Cleaning Between The Crevices

When you begin the process of cleaning the engine of your car, you need to remove the plastic covers that you see. This will make it easier to clean them separately and won't be in the way when you're cleaning the surface of the engine. You also need to remove the battery's negative cable. Chicago Northside Toyota can assist in showing you which cables to disconnect.

A plastic bag can be used to cover any of the electrical components so that they don't get wet during the process. Cover the air intake as well, especially if it's exposed. Any fuses and the control unit need to be covered so that they don't get wet. Spray a degreasing material on the substance to remove the grease and the dirt that has built up on the engine. The amount of debris will sometimes depend on how often you drive in Chicago.

After the engine surface is sprayed, use a cloth or a brush to scrub the surface. Does scrub the engine too hard because you don't want to damage any cables that are attached. Once it's scrubbed, you can gently rinse the surface.

 

 

Categories: Service