Owner guide · Chicago Northside Toyota · Chicago, IL

Toyota Sequoia Tire Size and Pressure Guide

Tire sizes, wheel sizes, recommended cold pressures, spares and how to check them, from Toyota's 2026 Sequoia owner's manual, with standard and available tires by grade from toyota.com's 2027 Sequoia features, read November 15, 2026. If your Sequoia is serviced with us in Chicago, here is what Toyota lists.

Technician checking a car tire
Illustrative photo
265/70R1818-inch all-season size
265/60R2020-inch size
265/50R2222-inch size
285/65R18TRD Pro all-terrain size

What tire size does a Toyota Sequoia use?

Toyota's 2026 Sequoia owner's manual lists 265/70R18 116T and 285/65R18 116T tires on 18-inch wheels and 35 psi (240 kPa) cold, 265/60R20 112H tires on 20-inch wheels at 36 psi (250 kPa), and 265/50R22 112H tires on 22-inch wheels at 38 psi (260 kPa) front and 42 psi (290 kPa) rear.

Sequoia tire sizes and pressures

Manual typeTire sizeWheel sizeRecommended cold pressureSpare tire (pressure)
18-inch, type A265/70R18 116T18 x 7 1/2 J35 psi (240 kPa)245/75R18 112T on 18 x 7J (36 psi, 250 kPa)
18-inch, type B265/70R18 116T18 x 7 1/2 J35 psi (240 kPa)265/70R18 116T on 18 x 7J
18-inch, type C285/65R18 116T18 x 8 1/2 J35 psi (240 kPa)265/70R18 116T on 18 x 7J
20-inch, type A265/60R20 112H20 x 8J36 psi (250 kPa)245/75R18 112T on 18 x 7J
20-inch, type B265/60R20 112H20 x 8 1/2J36 psi (250 kPa)265/70R18 116T on 18 x 7J (35 psi, 240 kPa)
22-inch265/50R22 112H22 x 8JFront 38 psi (260 kPa); rear 42 psi (290 kPa)245/75R18 112T on 18 x 7J (36 psi, 250 kPa)

From the "Tires and wheels" specifications in Toyota's 2026 Sequoia Owner's Manual (OM0C087U, pages 701-704), read November 15, 2026. Where the spare column shows no pressure, the manual lists a single pressure for that setup. Wheel nut torque: 97 ft-lbf (131 N-m) for aluminum wheels and 154 ft-lbf (209 N-m) for steel wheels.

2027 Sequoia tires by grade

2027 gradeStandard tiresAvailable tires
SR5265/70R18 all-season265/60R20 all-season; 265/70R18 Michelin LTX Trail all-terrain (TRD Off-Road Package); both as part of an option package
Limited265/60R20 all-season265/70R18 Michelin LTX Trail all-terrain (TRD Off-Road Package), as part of an option package
Platinum265/60R20 all-season265/50R22 all-season
1794 Edition265/60R20 all-seasonNone listed
Capstone265/50R22 all-seasonNone listed
TRD Pro285/65R18 Falken WILDPEAK all-terrainNone listed

From toyota.com's 2027 Sequoia features page, read November 15, 2026. The owner's manual does not say which grade uses which manual type, so go by the label on your vehicle.

Use the size and pressure on your Sequoia's label

The manual says the recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. If you are not sure which setup your Sequoia has, go by that label.

On the 18-inch and 20-inch setups, the manual says that when the vehicle is loaded or towing a trailer, you should add 3 psi (20 kPa) to the recommended cold tire inflation pressure.

The 22-inch setup is the only one with different front and rear pressures: 38 psi (260 kPa) front and 42 psi (290 kPa) rear, with the spare at 36 psi (250 kPa).

How to check Sequoia tire pressure

The owner's manual says to check tire inflation pressure every two weeks, or at least once a month, and not to forget the spare. Check only when the tires are cold: if the vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile (1.5 km), you will get an accurate cold reading.

Always use a tire pressure gauge; the manual notes it is difficult to judge inflation based only on appearance. Remove the valve cap, press the gauge onto the valve and read it. If the pressure is not at the recommended level, adjust it; if you add too much air, press the center of the valve to deflate. When you are done, apply soapy water to the valve to check for leakage, then put the valve cap back on.

Pressure is normally higher after driving because heat is generated in the tire. The manual says not to reduce tire pressure after driving, and never to exceed the vehicle capacity weight.

The manual lists the effects of incorrect tire pressure as reduced fuel economy, reduced driving comfort and poor handling, reduced tire life due to wear, reduced safety and damage to the drive train. If a tire needs frequent inflating, it says to have it checked by your Toyota dealer.

Chicago Northside Toyota hours

DepartmentHours
SalesMon-Fri 9 a.m.-9 p.m.; Sat 9 a.m.-7 p.m.; Sun closed
ServiceMon-Fri 7 a.m.-6 p.m.; Sat 8 a.m.-5 p.m.; Sun closed

From Chicago Northside Toyota's website, November 15, 2026. Holiday hours can differ.

Toyota Sequoia tire size and pressure FAQ

What size tires does a Toyota Sequoia have?

Toyota's 2026 Sequoia owner's manual lists four road-tire sizes: 265/70R18 116T, 285/65R18 116T, 265/60R20 112H and 265/50R22 112H. Toyota.com's 2027 Sequoia features list the same four sizes (without load and speed codes). The size on your Sequoia is shown on its tire and loading information label.

What tire pressure should a Sequoia have?

The manual lists 35 psi (240 kPa) cold for the 18-inch tires, 36 psi (250 kPa) for the 20-inch tires, and 38 psi (260 kPa) front with 42 psi (290 kPa) rear for the 22-inch tires. Go by the tire and loading information label on your vehicle.

What size tire is on the Sequoia TRD Pro?

Toyota.com's 2027 Sequoia features list 285/65R18 Falken WILDPEAK all-terrain tires as standard on the TRD Pro. The owner's manual lists 285/65R18 116T tires on 18 x 8 1/2 J wheels at 35 psi (240 kPa) cold.

What spare tire does the Sequoia use?

The manual lists a 245/75R18 112T spare for some setups and a 265/70R18 116T spare for others, both on an 18 x 7J wheel. Check the tire and loading information label and the spare itself.

Should I add air when towing with a Sequoia?

For the 18-inch and 20-inch setups, the manual says that when the vehicle is loaded or towing a trailer, add 3 psi (20 kPa) to the recommended cold tire inflation pressure.

What is the Sequoia lug nut torque?

The manual lists wheel nut torque of 97 ft-lbf (131 N-m) for aluminum wheels and 154 ft-lbf (209 N-m) for steel wheels.

How often should I check Sequoia tire pressure?

The owner's manual says to check tire inflation pressure every two weeks, or at least once a month, and not to forget the spare.

Sources

Tire sizes, wheel sizes, pressures, wheel nut torque and checking steps are from Toyota's 2026 Sequoia Owner's Manual (OM0C087U, pages 607-609 and 701-704), read November 15, 2026; tires by grade are from toyota.com's 2027 Sequoia features. Your own owner's manual and tire label are the final word for your vehicle. Address and hours are from Chicago Northside Toyota's own website. Photo is illustrative.

  1. 2026 Sequoia Owner's Manual (OM0C087U): tire inflation pressure, inspection and adjustment, check interval, effects of incorrect pressure (pages 607-609) and tires and wheels specifications (pages 701-704), Toyota, read November 15, 2026
  2. 2027 Sequoia features: standard and available tires by grade, Toyota, read November 15, 2026
  3. Address and sales and service hours, Chicago Northside Toyota, November 15, 2026