Owner guide · Chicago Northside Toyota · Chicago, IL
Toyota Tundra Tire Pressure Guide
Recommended cold tire pressures, tire sizes and how to check them, from Toyota's Tundra owner's manuals for gas V6 and hybrid trucks, read November 9, 2026. Other model years can differ. If you service your Tundra with us in Chicago, here is what the manuals say to check.
35 psi18- and 20-inch tires (cold)
38 psi22-inch tires, hybrid manual
36 psi245/75R18 spare, where listed
2 weekscheck interval, or at least monthly
What tire pressure should a Toyota Tundra have?
Toyota's Tundra owner's manuals list a recommended cold tire inflation pressure of 35 psi (240 kPa) for the 18-inch and 20-inch tires and 38 psi (260 kPa) for the 265/50R22 tire listed in the hybrid manual. Confirm the figure on the tire and loading information label on your truck.
Tundra tire pressure: gas V6 trucks
| Manual type | Tire size | Wheel size | Cold pressure | Spare listed |
|---|---|---|---|---|
| 18-inch, type A | 245/75R18 112T | 18 x 7 1/2J | 35 psi (240 kPa) | 245/75R18 112T on an 18 x 7J wheel: 36 psi (250 kPa) |
| 18-inch, type B | 265/70R18 116T | 18 x 7 1/2J | 35 psi (240 kPa) | 245/75R18 112T on an 18 x 7J wheel: 36 psi (250 kPa) |
| 18-inch, type C | 265/70R18 116T | 18 x 7 1/2J | 35 psi (240 kPa) | 265/70R18 116T on an 18 x 7J wheel (no separate spare pressure listed) |
| 20-inch, type A | 265/60R20 112H | 20 x 8J | 35 psi (240 kPa) | 245/75R18 112T on an 18 x 7J wheel: 36 psi (250 kPa) |
| 20-inch, type B | 265/60R20 112H | 20 x 8 1/2J | 35 psi (240 kPa) | 265/70R18 116T on an 18 x 7J wheel (no separate spare pressure listed) |
From the "Tires and wheels" specifications in Toyota's Tundra Owner's Manual OM0C084U (V35A-FTS engine), pages 561-562, read November 9, 2026. Wheel nut torque is 154 ft-lbf (209 N-m) for steel wheels and 97 ft-lbf (131 N-m) for aluminum wheels; for 18-inch type A the manual lists 154 ft-lbf only.
Tundra tire pressure: hybrid trucks
| Manual type | Tire size | Wheel size | Cold pressure | Spare listed |
|---|---|---|---|---|
| 18-inch, type A | 265/70R18 116T | 18 x 7 1/2J | 35 psi (240 kPa) | 265/70R18 116T on an 18 x 7J wheel (no separate spare pressure listed) |
| 18-inch, type B | 285/65R18 116T | 18 x 8 1/2J | 35 psi (240 kPa) | 265/70R18 116T on an 18 x 7J wheel (no separate spare pressure listed) |
| 20-inch, type A | 265/60R20 112H | 20 x 8J | 35 psi (240 kPa) | 245/75R18 112T on an 18 x 7J wheel: 36 psi (250 kPa) |
| 20-inch, type B | 265/60R20 112H | 20 x 8 1/2J | 35 psi (240 kPa) | 265/70R18 116T on an 18 x 7J wheel (no separate spare pressure listed) |
| 22-inch | 265/50R22 112H | 22 x 8J | 38 psi (260 kPa) | 245/75R18 112T on an 18 x 7J wheel: 36 psi (250 kPa) |
From the "Tires and wheels" specifications in Toyota's Tundra hybrid Owner's Manual OM0C085U, pages 564-565, read November 9, 2026. Wheel nut torque is 154 ft-lbf (209 N-m) for steel wheels and 97 ft-lbf (131 N-m) for aluminum wheels for every setup listed.
Use the pressure on your Tundra's label
Both Tundra manuals list 35 psi (240 kPa) as the recommended cold pressure for every 18-inch and 20-inch tire. The hybrid manual also lists a 265/50R22 tire on a 22 x 8J wheel at 38 psi (260 kPa).
The manuals say the recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. If your tires are a different size from those listed, or you are not sure which figure applies, go by that label.
Where the spare is a 245/75R18 112T tire, the manuals give it 36 psi (250 kPa). Do not forget to check the spare when you check the other tires.
How to check Tundra tire pressure
The owner's manuals say to check tire inflation pressure every two weeks, or at least once a month, and not to forget the spare. Check only when the tires are cold: if the truck has been parked for at least 3 hours or has not been driven more than 1 mile (1.5 km), you will get an accurate cold reading.
Always use a tire pressure gauge; the manuals note it is difficult to judge inflation by appearance. Remove the valve cap, press the gauge onto the valve and read it. If the pressure is not at the recommended level, adjust it; if you add too much air, press the center of the valve to let some out. When you are done, apply soapy water to the valve to check for leaks, then put the valve cap back on.
Pressure is normally higher after driving because heat is generated in the tire. The manuals say not to reduce tire pressure after driving, and never to exceed the vehicle capacity weight.
The manuals list the effects of incorrect tire pressure as reduced fuel economy, reduced driving comfort and poor handling, reduced tire life due to wear, reduced safety and damage to the drive train. If a tire needs frequent inflating, they say to have it checked by your Toyota dealer.
Chicago Northside Toyota hours
| Department | Hours |
|---|---|
| Sales | Mon-Fri 9 a.m.-9 p.m.; Sat 9 a.m.-7 p.m.; Sun closed |
| Service | Mon-Fri 7 a.m.-6 p.m.; Sat 8 a.m.-5 p.m.; Sun closed |
From Chicago Northside Toyota's website, November 9, 2026. Holiday hours can differ.
Toyota Tundra tire pressure FAQ
What tire pressure should a Toyota Tundra have?
Toyota's Tundra owner's manuals list a recommended cold tire inflation pressure of 35 psi (240 kPa) for every 18-inch and 20-inch tire they list. The 265/50R22 tire in the hybrid manual is the exception at 38 psi (260 kPa). Confirm the figure on the tire and loading information label on your truck.
What pressure does the Tundra spare take?
Where the spare is a 245/75R18 112T tire on an 18 x 7J wheel, the manuals give 36 psi (250 kPa) for the spare. Where the spare is a 265/70R18 116T tire, no separate spare pressure is listed; the manuals give one pressure line for the whole setup.
Is Tundra tire pressure different front and rear?
No. The Tundra manuals list one recommended cold pressure per tire setup, with no separate front and rear figures.
How often should I check Tundra tire pressure?
The owner's manuals say to check tire inflation pressure every two weeks, or at least once a month, and not to forget the spare.
Should I let air out after driving?
No. The manuals say it is normal for tire pressure to be higher after driving because heat is generated in the tire, and not to reduce the pressure after driving. Check when the tires are cold.
What is the Tundra lug nut torque?
The manuals list wheel nut torque of 154 ft-lbf (209 N-m) for steel wheels and 97 ft-lbf (131 N-m) for aluminum wheels. For the gas V6 manual's 18-inch type A setup, only the 154 ft-lbf figure is listed.
Need your tires checked?
Our service team at 6042 N. Western Ave. in Chicago can check your Tundra's tires and pressures.
Sources
Tire sizes, wheel sizes, pressures, wheel nut torque and checking steps are from Toyota's Tundra Owner's Manuals OM0C084U (gas V6; pages 493-494 and 561-562) and OM0C085U (hybrid; pages 492-493 and 564-565), read November 9, 2026. Address and hours are from Chicago Northside Toyota's own website. Image is illustrative.
- Tundra Owner's Manual (OM0C084U, V35A-FTS gas V6): tire inflation pressure, inspection and adjustment, check interval, effects of incorrect pressure (pages 493-494) and tires and wheels specifications (pages 561-562), Toyota, read November 9, 2026
- Tundra hybrid Owner's Manual (OM0C085U): tire inflation pressure check (pages 492-493) and tires and wheels specifications (pages 564-565), Toyota, read November 9, 2026
- Address and service hours, Chicago Northside Toyota, November 9, 2026
